SPRAT (Society of Professional Rope Access Technicians) Training
2023-08-21 07:30 - 2023-08-25 17:00 (America/New_York) | Med-Tex Safety Services, 6940 State Road, Philadelphia, PA, 19135

Staying Safe When Digging: Excavation & Trenching Basics
2023-08-30 14:00 - 15:00 | Zoom
Tuesday, August 29 and Wednesday, August 30 at 2:00pm Eastern (1 hour +) Eastern – ZOOM
CPWR – The Center for Construction Research and Training
Dirt is heavy. Really heavy. One cubic yard of dirt is the weight of a mid-sized car. For this reason, excavating the earth’s surface for any reason can be dangerous, especially when that excavation takes the form of a trench – a cavity deeper than its width and narrower than its length. If an excavation cave-in occurs (even a partial one), workers can be crushed in seconds, even if their head and arms remain above the dirt. Join CPWR – The Center for Construction Research & Training, the Associated General Contractors of America, OSHA Region III, and the National Institute for Occupational Safety and Health to learn more about staying safe during excavation activities. Dr. Douglas Trout will review the basics of excavation and trenching safety and our contractor safety specialists from Ed Bell Construction Company and BTConstruction will follow up by sharing their practical experience from the field along with information on activities and initiatives they are engaged in, including, for example, the Trenching Excavation Safety Task force (TEST) to increase awareness and prevention of excavation injuries and fatalities.
NOTE: A Spanish audio option will be provided through the use of a simultaneous translation service.
NOTA: Se proporcionará una opción de audio en español a través del uso de un servicio de traducción simultánea.
Click here to register and submit questions in advance.

Unleashing Safety Leadership: Navigating Accountability and Compliance (OH&S webinar series)
2023-10-25 14:00 - 15:00 | Webinar
Embark on a transformative exploration of safety leadership in this engaging session, where we delve into strategies for cultivating accountability, compliance, and effective auditing practices. Learn how to empower operational managers to become safety advocates and drive performance. Discover methods to navigate the intricate landscape of holding leadership teams accountable for operational excellence, which includes safety and client expectations. Join us as we unravel the art of balancing consistency, adaptability, and thorough auditing in health and safety management systems, leaving you with actionable insights to change your approach.
Cost: Complimentary webinar

Click to register and read more >>>

Identifying Danger Zones on the Rooftop (OH&S webinar series)
2023-10-26 14:00 - 15:00 | Webinar
A training session on rooftop safety, where we’ll cover critical areas including Access Points, Rooftop Openings, and Unprotected Edges. In this session, we’ll discuss common rooftop fall hazards, applicable OSHA codes, and the Risk Assessment Matrix that guides decision-making to protect workers. Kee Safety will demonstrate how our solutions can protect workers during routine maintenance and other tasks that require rooftop access, and Dan Huntington, a rooftop safety expert, will provide practical tips and engage the audience to help you make informed decisions that impact worker safety.
Cost: Complimentary webinar.
Click here to register and read more >>>

Free Excavator Training: Pennsylvania One Call: The Keystone of Damage Prevention
2023-11-09 08:00 - 10:00 | Hilton Garden Inn Valley Forge Oaks, 500 Cresson Boulevard, Phoenixville, PA, 19420
Learn about excavator responsibilities under PA Act 287, as amended. All classes start precisely at 8:00 a.m. and end at 10:00 a.m. A complimentary breakfast will be served between 7:30 a.m. and 8:00 a.m. Pre-registration is required. The course is equal to 2 PDH for Professional Engineering Training.

Login to PA One Call to start your registration

OSHA's Top Ten Most Cited Safety Standards During Fiscal Year 2023, and Managing Safety Beyond the Obvious (OH&S complimentary webinar series
2023-11-09 14:00 - 15:00 | Webinar
Each year OSHA publishes a “Top Ten” list of citations issued to employers during the previous fiscal year (October 1st to September 30th). The list gives employers an idea of the top violations that OSHA has identified during their visits to facilities and jobsites across the United States and some of the things they should look out for on their own worksites. At the time of this presentation, it is anticipated that OSHA will have just released a preliminary summary of its citation data for fiscal year 2023.
Cost: Complimentary webinar
Click here to read more and register >>>

Authorized Alternate Excavation Class to the Philadelphia OTI 3015 course
2023-11-14 07:30 - 2023-11-15 16:00 | Med-Tex Safety Services, 6940 State Road, Philadelphia, PA, 19135
In case any of your team or members are impacted by the L&I training requirement, please see attached for an Authorized Alternate Excavation Class to the Philadelphia OTI 3015 course presented by Med-Tex Services. The two day class is being offered locally at their training center off the Cottman Ave Exit.
Cost: $795 per person
Click here to read more and register >>>

Here is a link to the L&I site allowing our course:
https://www.phila.gov/departments/department-of-licenses-and-inspections/inspections/contractor-requirements/#alternative-training-programs

Falls in Construction: New Resources & a Data-Driven Exploration of Trends hosted by CPWR
2023-11-15 14:00 | Webinar
A discussion of new data on trends in falls and updated resources from CPWR – The Center for Construction Research and Training and the OSHA-NIOSH-CPWR National Campaign to Prevent Falls in Construction. The webinar will cover trends in fatal and nonfatal falls in construction, including information by subsector, state, and injury type. CPWR Data Center resources that can be used to explore fall injuries qualitatively through injury narratives will also be shown. Presenters will also provide information on the latest Falls Campaign resources, the campaign website redesign, and evaluation data from the 2023 Stand-Down to Prevent Falls in Construction.
Click here to register for the free webinar

Nanomaterials in Construction: CPWR Research and Resources
2023-11-16 14:00 - 15:00 | Webinar
Construction workers are increasingly likely to encounter products that contain engineered nanoparticles, which are many times smaller than a human hair. Research shows that some nanoparticles—which now appear in insulation, cement, paints and coatings, wood products, and many other products–pose health hazards, but the risks they pose depend upon exposure. Join this webinar to learn how nanomaterials are used in construction, their risks, and how to be safer with CPWR resources like the Construction Nanomaterials Inventory (eLCOSH Nano), training materials like toolbox talks, and the CPWR Data Center’s new Nanomaterials Data Dashboard.
Panelists:

Gavin West, MPH, Director, Nanomaterials Research, CPWR
Bruce Lippy, PhD, CIH, CSP, President, The Lippy Group, LLC, and consultant to CPWR
William Harris, MS, Research Analyst, Data Center, CPWR

Click here to register and submit a question in advance.
This is a CPWR sponsored webinar. Not MACSC.

Webinar - Designer Obligations; Pennsylvania One Call
2023-11-20 08:00 - 17:00
Are you an architect, engineer or other person who or which prepares a drawing for a construction, or other projects which requires excavation or demolition work in Pennsylvania? Then you are considered a Designer under the PA Underground Utility Line Protection Act 287 as Amended (Pennsylvania 811 Law). This one-hour WebEx webinar will explain all the Designer obligations in Pennsylvania 811 Law. This course is equal to 1 PDH for Professional Engineering Training. If you would like a certificate of participation, please wait 5 days after the event and then login to Pennsylvania 811’s website, select My Account and then My Participation to print your certificate.

Please be aware that this webinar platform enables 100 people to attend first come, first served. Please review our Events Calendar for other opportunities if this webinar is full.
Click Here to Join the Meeting
Meeting number:
2631 888 8566
Password:
[REDACTED] (84753379 from phones and video systems)
Host key:
117397
Join by video system
Dial 26318888566@webex.com
You can also dial 173.243.2.68 and enter your meeting number.
Join by phone
+1-408-418-9388 United States Toll
Access code: [REDACTED] 888 8566
Host PIN: [REDACTED]

When
12/19/2023 1:00 PM – 2:00 PM

Ergonomics: Good for Employees, Good for Business
2023-11-30 12:00 - 13:00
What’s the webinar about?
Every year work-related musculoskeletal disorders (e.g., sprains and strains) make up about 30-35% of workplace injuries and about 35-40% of direct injury costs. Ergonomics has been proven to be a cost-effective way to prevent these injuries and business losses. And yet, many companies are hesitant to embrace ergonomics because it is often not fully understood and at times politicized. But times are changing. More and more companies are engaging ergonomic programs to gain a competitive advantage by not only reducing injuries and related costs but also by boosting productivity.
We will discuss:

The changing ergonomics regulatory landscape
What ergonomics is all about
How ergonomics can be value added to your company
A 5-step process your company can use to reduce injury risk and increase operational efficiencies

Who should attend?

EHS Professionals
Operations/Production Managers
Manufacturing/Process Engineers
Facilities Managers
Human Resources Managers
Anyone interested in learning more about ergonomics!

Feel free to invite your colleagues!
Presenter:
Ed Havey, M.S, CPE, Ergonomics, ehavey@complianceplace.com
Moderator:
Erin Rymsa, Director of Training Services, erymsa@complianceplace.com

What You Need to Know about the OSHA National Emphasis Program for Fall Protection
2023-12-07 14:00 - 15:00 | Webinar
OSHA has developed a National Emphasis Program to prevent falls—the leading cause of fatal workplace injuries and the violation the agency cites most frequently during inspections. OSHA can now open inspections whenever they see someone working at height — not just when they observe violations or have other reasons to visit your site. This session will help participants prepare for a potential OSHA visit, evaluate gaps in your fall protection program, and provide meaningful recommendations to improve safety.
Click here to register for this free webinar hosted by OH&S

What Is Total Worker Health and How Can Your Site Benefit from It? (webinar)
2023-12-12 14:00 | Webinar
This webinar will empower you with a comprehensive understanding of Total Worker Health and how it can significantly benefit your organization, from enhancing worker wellbeing to improving cost effectiveness and productivity. Don’t miss out on this invaluable opportunity to learn from the experts at Medcor who have spent the last 35+ years serving worker health in the most labor-intensive industries.
Click here to register for the free webinar by OH&S

The Hunan Side of Safety: Overcome Objections and Address Motivation to Increase Participation
2023-12-12 14:00 - 15:00 | Webinar
Getting employees more involved in safety requires understanding their motivations. To improve your safety culture, you need worker buy-in and support. Many safety professionals have wondered, “How do I increase employee participation?” While there is no simple answer, employees will participate more if they want to — too often, they simply choose not to participate. The question should be, “What would make employees choose to participate more?” If employees and supervisors understand the value and benefits, they’ll participate more.
We Will Share Ideas on Overcoming These Challenges Such As:

Showing employees why safety matters by demonstrating how it impacts them personally.
Dealing with reluctant (often experienced) workers who push back against the rules.
Dealing with those (often younger) workers who think they’re invincible or won’t get hurt.
Tips for increasing participation, such as identifying workers to be safety advocates and leading from the middle.
Tips for supervisors who must support safety or could undermine your efforts.

And much more!
Sponsored by ISHN and J.J Keller Safety Managment Suite
Click here to Register.

Preventing Bullying and Violence in the Workplace: 5 Strategies to Reduce Risk
2023-12-13 14:00 - 15:00
Did you know that workplace violence is the third leading cause of occupational fatalities? The effects of workplace bullying and violence range from low morale to injuries or even death. Incidents of violence quickly become headline news. It’s an ongoing concern for employers and employees.
This webcast will cover five strategies to help reduce risk, including:

Recognizing a hostile work environment
Handling a bully at work
Investigating workplace misconduct
Identifying warning signs of workplace violence
Terminating an employee safely

Participating in this webcast will give you the guidance needed to help create and maintain a safer work environment for all. Last, this event will also include a live Q&A – bring your questions!
Register for this free webinar!
DATE: December 13, 2023
Click here to register for the free webinar by OH&S

PUC Online Compliance Training - Facility Owner and Locator: Pennsylvania One Call
2023-12-14 08:00 - 11:00 | Webinar
This three hour on-line WebEx PUC Compliance Training – Facility Owner and Locator is for those persons or companies that were instructed by the Public Utility Commission (PUC) to take PUC certified training. This on-line training covers responsibilities of the Locator and Facility Owner under PA Act 287, as amended. Topics covered in this session include the APWA color code, complex projects, emergency notifications, the Direct Contact rule, locating technology, the AVR process and other locator-related obligations of PA Act 287, as amended. The training session has a PUC Compliance Exam for attendees. To take the exam you must have a DPC/AVR case number and be using a computer. (Note: You cannot take the exam on a cell phone or tablet, i.e. iPad) The exam is proctored and scored by Pennsylvania 811, and the results are provided to the attendee immediately after taking the exam. This course is equal to 2 PDH for Professional Engineering Training. If you would like a certificate of participation, please wait 5 days after the event and then login to Pennsylvania 811’s website, select My Account and then My Participation to print your certificate.

Click here to register for Pennsylvania One Call free online training

PUC Online Compliance Training - Excavator; Pennsylvania One Call
2023-12-15 08:00 - 10:00 | Webinar
This three hour on-line WebEx PUC Compliance Training – Excavator is for those persons or companies that were instructed by the Public Utility Commission (PUC) to take PUC certified training. This on-line training covers responsibilities of the Excavator under PA Act 287, as amended. Topics covered in this session include the APWA color code, the tolerance zone, complex projects, emergency notifications, prudent excavation techniques, the AVR process, CGA Best Practices, the HDD Good Practices guidelines, and other excavator-related obligations of PA Act 287, as amended. The training session has a PUC Compliance Test for attendees. To take the test you must have a DPC case number and be using a computer. (Note: You cannot take the exam on a cell phone or tablet, i.e. iPad) The exam is proctored and scored by Pennsylvania 811, and the results are provided to the attendee immediately after taking the exam. This course is equal to 2 PDH for Professional Engineering Training. If you would like a certificate of participation, please wait 5 days after the event and then login to Pennsylvania 811’s website, select My Account and then My Participation to print your certificate.

Five days before the training session, you will receive an email from WebEx i.e. messenger@webex.com requesting that you register for the session. Once registered WebEx will send you a confirmation email with the WebEx session link and password to attend the session. This email will also have the download links for the course material. Please download before the start of the session.

When: 12/15/2023 8:00 AM – 10:00 AM

Where: PUC Online Excavator Compliance Training

Click here to register for Pennsylvania One Call onlin training

HazCom, Hazmat, HazWaste, and HAZWOPER: Navigating OSHA, DOT, and EPA Chemical Compliance
2023-12-20 14:00 - 15:00
Does your company manufacture, package, transport, store, use, and/or dispose of chemicals? If yes, this webcast applies to you! Chemicals play a vital role in the U.S. economy. However, some chemicals pose an environmental, health, and/or safety risk during their chemical life cycles.
Whether you call them hazardous chemicals, hazardous materials, hazardous wastes, or hazardous substances, these chemicals are often regulated by OSHA, DOT, and/or EPA. In fact, the following chemical standards remain some of the most confusing regulations covering millions of companies nationwide:

29 CFR 1910.1200 — OSHA Hazard Communication Standard
49 CFR 171-180 — DOT Hazardous Materials Regulations
40 CFR 260-262 — EPA Hazardous Waste Standards
29 CFR 1910.120/1926.65 — OSHA Hazardous Waste Operations and Emergency Response Standards

This webcast explores these four major sets of regulations to help you better navigate the basics of chemical compliance. The more you understand them, the easier, faster, and less costly your compliance efforts may be. So don’t miss out. Register today!
Register for this free 90 Minute Webinar!
DATE: December 20, 2023
TIME: 2:00PM ET – 1:00PM CT – 11:00AM PT
Click here to register for this free webinar by OH&S

PLANNING PROJECTS FOR PROJECT OWNERS AND DESIGNERS PROGRAM: Pennsylvania One Call
2024-02-14 12:00 - 13:00
Are you an architect, engineer or other person who or which prepares a drawing for a construction, or other projects which requires excavation or demolition work in Pennsylvania? Then you are considered a Designer under the PA Underground Utility Line Protection Act 287 as Amended (Pennsylvania 811 Law). This one-hour program will explain the Designer obligations under the Pennsylvania 811 Law including SUE requirements. A complimentary lunch will be served starting at 11:30AM, program to start at 12:00PM, preregistration is required. This course is equal to 1 PDH for Professional Engineering Training. Lunch: 11:30am Program Start: 12:00pm Program End: 1:00pm

If you would like a certificate of participation, please wait 5 days after the event and then login to Pennsylvania 811’s website, select My Account and then My Participation to print your certificate.
Directions to EventAll attendees are encouraged to join at 10:30 AM for the quarterly meeting of the Delaware Valley Damage Prevention Council. The Delaware Valley Damage Prevention Council is a group of stakeholders who promote safe, efficient excavation, utility coordination and education. It is made up of contractors and their representatives, utility companies, government agencies, and others who serve the excavation and utility industry. The group has been meeting for more than a decade and is chartered through the Common Ground Alliance, a nonprofit national association of similar stakeholders. For additional information please contact Greg Danks at 215-834-2069 or gwdanks@pa1call.org.

When; 2/14/2024 12:00 PM – 1:00 PM

Where: Kings Mills 6000 Pennell Rd Media PA 19063 United States

Click here to log-in and register for the PA One Call event

Bloodborne Pathogens Terminology: Exposing the regulation one term at a time
2024-02-14 14:00 - 15:00 | Webinar
Although the Bloodborne Pathogen Standard has been around over three decades, it continues to confuse employers. OSHA 29 CFR 1910.1030 is cited 300 to 500 times each year, making it a frequently violated regulation in Part 1910. Perhaps the confusion and noncompliance may be found in the very text of the standard — legal terminology that has been with the standard from the very beginning.
The Bloodborne Pathogens Standard defines 28 terms in its definitions section, so the use of these words and phrases may make this particular regulation a challenge for employers in general industry.
This webcast explores:

Definitions of the key terms in the standard,
OSHA’s intent, and
Answers to your questions.

The better you understand the terminology, the easier, faster, and less costly your compliance efforts may be. So don’t miss out. Register today!
Register for this free webinar!
DATE: February 14, 2024
TIME: 2:00PM ET – 1:00PM CT – 11:00AM PT

OH&S Sponsored Free Webinar

RSVP Today

Program Locator: Pennsylvania One Call, in -person
2024-02-22 08:30 - 12:00
The program objectives explain the definitions and terminology used in the PA Act 287 of 1974, as amended, a description of a correct notification, an explanation of marking underground lines with the American Public Works Association (APWA) color code standards, and an illustration of how to respond through the Karl Automated Response to Locates (KARL) system. The program is approved under the Pennsylvania Department of Environmental Protection (PA DEP) water and wastewater operators-training program for 3 contact hours. Those attendees who are licensed water and wastewater operators and are in their 3-year license cycle are eligible for continuing education contact hours. Program designed for member facility owners, locators and municipalities. Event is from 08:30 to 12:00 PM. Please feel free to check in as early as 8:00 AM. Lunch will be served at 12:00 PM.

Directions to Event

When: 2/22/2024 8:30 AM – 12:00 PM

Where: Kings Mills 6000 Pennell Rd Media PA 19063

Click here to login and register for the event

Excavator Program: Pennsylvania Once Call, In-person
2024-03-13 08:00 - 10:00
Learn about excavator responsibilities under PA Act 287, as amended. All classes start precisely at 8:00 a.m. and end at 10:00 a.m. A complimentary breakfast will be served between 7:30 a.m. and 8:00 a.m. Pre-registration is required.

Directions to Event

When: 3/13/2024 8:00 AM – 10:00 AM

Where: Cannstatter Volksfest Verein
9130 Academy Rd
Philadelphia PA 19114 United States

Click here to login and register for the event

Identifying Danger Zones on the Rooftop
2024-03-20 14:00 - 15:00 | Webinar
Overview:
Join us for a training session on rooftop safety, where we’ll cover critical areas including Access Points, Rooftop Openings, and Unprotected Edges. In this session, we’ll discuss common rooftop fall hazards, applicable OSHA codes, and the Risk Assessment Matrix that guides decision-making to protect workers. Kee Safety will demonstrate how our solutions can protect workers during routine maintenance and other tasks that require rooftop access, and Dan Huntington, a rooftop safety expert, will provide practical tips and engage the audience to help you make informed decisions that impact worker safety.
Here are a few key topics that we will cover in this training session:

Common rooftop fall hazards and applicable OSHA codes.
The Risk Assessment Matrix and how it guides decision-making to protect workers.
Kee Safety solutions for protecting workers during rooftop maintenance and other tasks.

Speaker:
Daniel Huntington, General Manager – Kee Safety, Inc.
Daniel Huntington is an experienced sales and technical product trainer with a demonstrated history of working in the Fall Protection Industry. As a Fall Protection Industry Expert, he is formally trained in OSHA fall protection standards and risk assessment. He is a respected compliance educator and trainer in rooftop safety, presenting at the 2019 ASSP Expo for the International Society of Fall Protection (ISFP) where he facilitated a course on improving safety for people working at height.
Sponsored by Kee Safety
Date: Wednesday – March 20, 2024
Register Today at:
https://1105tech.com/portal/wts/uc%5EcmQeceA46ecfBAa%7C7zCqejbnCA0bAB%7EnOB%7CzYg3d
—————————————
Can’t make the live event?
Register now and view this presentation on-demand after March 20th at no cost, at your convenience.
By attending this webinar, you may be eligible to earn CEUs.

Understanding Heat Stress and How to Stay Safe
2024-03-21 14:00 - 15:00 | Webinar
Register Today at:
https://1105tech.com/portal/wts/uc%5EcmQeceBjqecfCoq%7C728DejcgA3ebAB%7EnOB%7CzYg3d

Overview:
With a changing climate, the public, especially those exposed to occupational heat, are facing increased risk for heat injury and illness. This presentation will educate environmental public health professionals on the physiological responses of workers exposed to heat and about the dangers, causes, and mitigation of heat stress while on the job.

Working in hot environments is often unavoidable, however, this seminar will educate attendees about the warning signs and strategies to prevent serious heat related injuries or illness to keep workers safe while performing their jobs. This will involve a discussion about the physiological responses to heat, acclimatization to heat, and heat injury and illness. In addition, techniques for the measurement of thermal stress from the environment and from metabolic sources will be discussed. There will also be a discussion about the technologies used to limit heat exposure.
Speaker:
Dr. W. Jon Williams is currently a Senior Research Physiologist in the Research Branch of the National Personal Protective Technology Laboratory (NPPTL)/NIOSH/CDC. Dr. Williams has 34 years of experience in human experimental physiology beginning with a National Academies/National Research Council Resident Research Associateship (post-doc) at the NASA Johnson Space Center in the Medical Sciences Division, as a NASA contractor (Wyle Life Sciences) as a Senior Research Scientist. In 2003, Dr. Williams was recruited to the NPPTL to establish a human physiological research capability. Dr. Williams also established a biochemistry lab and a thermos-physiology lab including a human rated environmental chamber to support human research in extreme environments. He has conducted human thermal research at the NPPTL for ~21 years.
Sponsored by Vector Solutions, Epicore Biosystems, Zappos at Work, SlateSafety
Date: Thursday – March 21, 2024
Register Today at:
https://1105tech.com/portal/wts/uc%5EcmQeceBjqecfCoq%7C729eejcgA3ebAB%7EnOB%7CzYg3d
—————————————
Can’t make the live event?
Register now and view this presentation on-demand after March 21st at no cost, at your convenience.
By attending this webinar, you may be eligible to earn CEUs.

Navigating the Storm: How to Build a Crisis Management Toolbox that Works for You.
2024-04-11 14:00 - 15:30 | Webinar
View in browser

Navigating the Storm
How to Build a Crisis Management Toolbox that Works for You.

April 11, 2024
2:00 – 3:15 p.m. ET

REGISTER TODAY

It’s not a matter of if, but when will there be an incident or crisis?
A first responder’s vehicle is prepared for action, inspected regularly, and ready to go. Can you say the same thing about your Crisis Management Plans?

When was the last time you or your team members reviewed, updated, or tested your Crisis Management Plans?
Have you had any company personnel changes?
Have you had any process or operational changes?
Is your Crisis Management Plan up to date, or it just sitting on the shelf?
Most importantly when that phone call comes in…. What’s your first step?

Stop crossing your fingers or saying it won’t happen to you.
Don’t assume employees will know what to do.
The time to prepare is now.
Join Graham Company and Atlas Marketing on April 11 at 2:00 p.m. to discuss the steps, processes, and tools needed to effectively prepare for the next crisis:

How to Build a Crisis Management Model
Crisis Response Exercise
Crisis Communications Strategy

The Speakers

Chris Martin
Founder and President, Atlas Marketing

Steve Vigland, MS, CSP
Safety Consultant, Graham Company

Megan Farrow, Esquire
Claims Consultant, Graham Company

Boosting Efficiency While Cutting Costs: Learn to Leverage Online Worker Orientations
2024-04-17 08:00 - 17:00
Date: Wednesday – May 1, 2024
Register Today at:
https://1105tech.com/portal/wts/uc%5EcmQece%5BnqecfVv6%7C9%5Ex%5Eej%5B6AnMbAB%7EnOB%7CzYg3d

Overview:
Explore the benefits of shifting to digital onboarding and orientation methods to boost your organization’s productivity and decrease expenses. This webinar is designed for those in safety, training, and human resources roles looking to transform their orientation and onboarding strategies. Gain knowledge from experts who will share key best practices and technologies that help save resources.
Topics include the key benefits such as improved employee involvement and safety outcomes through an effective integration into the company’s best practices, safety protocols, worksite navigation, and beyond. Attend this session to tap into the advantages of digital onboarding and propel your organization forward.

How Nudge Theory Can Reduce Hand Injuries: A Nudge Led Approach to Hand Safety
2024-04-17 08:00 - 17:00
OVERVIEW:
Ever found yourself wondering why workers have absent minded accidents?
It turns out our brains are engineered to optimize efficiency and respond swiftly. Most of our decisions aren’t the result of careful, rational thought. Instead, 90% or more of our decisions are driven by instinct. While this might be beneficial in saving time or effort, it doesn’t always result in the wisest decisions regarding our safety.
Because of this, the environment and context in which we’re making safety decisions plays a tremendous role in shaping our actions. This is good news! As Superior Glove has learned in their work with behavioral experts, we can reduce and eliminate injuries with tiny tweaks in workers’ surroundings—”nudges” that can sway decisions and spark positive behavior.
In this webinar, Superior Glove’s Sarah Gibson and Aaron Harroch explain what nudge theory is and how to apply it to create a safer workplace that can change worker behavior.

What “nudging” is and how it can be used to reduce or eliminate hand injuries
How to assess work environments for place to institute nudges
Practical examples that can be implemented
What pitfalls to avoid when creating nudges

Register Today!

How to Prevent the Most Common HazCom Violations: An In-Depth Look at OSHA Citations!
2024-04-30 14:00 - 15:00
Year in and year out, Hazard Communication (HazCom) is one of OSHA’s most frequently cited standards, with 2,641 violations in FY 2023 alone, resulting in $4,849,205 in penalties. This webcast will look at the most common HazCom violations OSHA cites for, including:

The written HazCom program: Lack of program or inadequate program
Training and information requirements: Lack of training or inadequate training
Safety data sheets (SDSs): Maintaining an SDS for each hazardous chemical, and making SDSs readily accessible
Labels: In-house and shipped containers

Register here

Boosting Efficiency While Cutting Costs: Learn to Leverage Online Worker Orientations
2024-05-01 14:00 - 15:00 | Webinar
Register Today at:
https://1105tech.com/portal/wts/uc%5EcmQece%5BnqecfVv6%7C9%5Ex%5Eej%5B6AnMbAB%7EnOB%7CzYg3d
Overview:
Explore the benefits of shifting to digital onboarding and orientation methods to boost your organization’s productivity and decrease expenses. This webinar is designed for those in safety, training, and human resources roles looking to transform their orientation and onboarding strategies. Gain knowledge from experts who will share key best practices and technologies that help save resources.
Topics include the key benefits such as improved employee involvement and safety outcomes through an effective integration into the company’s best practices, safety protocols, worksite navigation, and beyond. Attend this session to tap into the advantages of digital onboarding and propel your organization forward.

Facility Safety - Elevating Safety in High Injury-Rate Establishments: A Risk-Based Prioritized Approach
2024-05-02 14:00 - 15:00 | Webinar
AGENDA:
2:00PM ET / 1:00PM CT / 11:00AM PT
Facility Safety – Elevating Safety in Warehouse, Distribution Center and High Injury-Rate Retail Establishments: A Risk-Based Prioritized Approach
3:00PM ET / 2:00PM CT / 12:00 PT
Hottest Third-Party Solutions from: MARTOR
OVERVIEW:
In today’s fast-paced supply chain, where the demand for quick and accurate deliveries has never been higher, the safety of your warehouse and distribution center operations is pivotal. According to the U.S. Bureau of Labor Statistics, the number of people working in warehousing applications has grown tremendously in the last several years, and injury rates have grown out of proportion – with injury rates significantly higher than industry averages at more than five injuries per 100 full-time workers annually. This underscores the critical need for an emphasis on protecting workers from a multitude of common warehouse hazards.
In fact, OSHA has kicked off a National Emphasis Program (NEP) on Warehousing and Distribution Center Operations.
This webinar will share some details about the OSHA NEP, and help you take a risk driven, priorities-based approach to keeping warehouse and distribution center workers safe. Learn about key warehouse safety risks including those that OSHA has its sights on, like slips, trips, and falls; ergonomic and musculoskeletal injuries; powered industrial vehicle accidents; material handling, and heat stress – but also others that might stem from warehouse growth and new technologies. The webinar will cover solutions for addressing hazards such as processes for hazard identification and risk analysis, effective safety training, materials handling equipment and education, ergonomics solutions, and warehouse traffic management.
Learn how addressing these priorities creates a safer work environment, reduces the risk of accidents and injuries, and enhances overall productivity and morale among warehouse workers. Reserve your spot today!
SPONSOR: Martor® USA, Bilco, Honeywell Safety Products, Lift-All®, Bradley Corp., SafetyIQ, Skillsoft, National Fire Protection Association, Vector Solutions

Register Today!
